Physio Control battery support system portable defibrillators
The PHYSIO-CONTROL® Battery Support System charges and reconditions the company's FASTPAK® and Battery Pak batteries. The Battery Support System will charge three FASTPAK batteries in less than 70 minutes. Indicator lights facilitate monitoring of the charging cycle. An integral battery discharger permits reconditioning and testing of batteries. After battery reconditioning and testing, battery capacity is automatically displayed.
The integral defibrillator test load allows standard paddle defibrillation testing. Lighted energy display shows number of joules delivered into the test load with each defibrillation.
The Auxiliary Power Supply may be used to power the LIFEPAK 10 defibrillator/monitor/pacemaker, LIFEPAK 11 diagnostic cardiac monitor, or LIFEPAK 11 defibrillator/pacmaker when the use of batteries is not desirable. The Auxiliary Power Supply will charge batteries installed in the defibrillator/monitor; fully depleted batteries are recharged in 19 hours. The Auxiliary Power Supply does not condition the batteries.
The Battery Support System and Auxiliary Power Supply join a standardized family of products from Physio-Control.
|
|
Battery Support System
Batteries recharge in 70 minutes
Battery capacity retention through trickle charge
Integral battery discharger/battery capacity evaluator
Integral defibrillator test load
Auxillary Power SUPPLY
Available in AC or DC
Charges batteries in LIFEPAK 10 and LIFEPAK 11 family of products; allows operation from line power
|
|